Workshop Manuals Factory service & repair Fiat
Fiat Seicento Factory Service Manual (1998-2010)02 · 10 Engine
02 · Engine

Operations

Make
Fiat
Model
Seicento Factory Service Manual
Year
1998–2010
Section
Emission control system (1108) › Operations
10 EngineOperations

OPERATIONS

1080E12 - MULTIFUNCTIONAL VALVE - R+R WITH FUEL TANK REMOVED

Removal

  • Position the vehicle on a hoist.
  • Disconnect the negative (-) battery terminal.
NameConnector
-BatteryA1
  1. Unscrew the screws (1a) and take out the rubbers (1b) inside the fuel cap flap seat.
  • Follow Op. 4450B11 Rear WHEEL (one) - R.R.
Diagram of fuel cap flap seat showing screws labeled 1a and rubber components labeled 1b
  1. Raise the vehicle.
  2. Follow Op. 7055B42 SUPPLEMENTARY WHEEL HOUSING (One) - R.R.
  3. Move the fuel inlet pipe and the fuel vapours tank.
  4. Disconnect the active charcoal filter pipe from the multifunctional valve.
  5. Unscrew and remove the multifunctional valve.
Diagram of multifunctional valve assembly with callout numbers 1, 2, and 3

Refitting

  • Screw in the multifunctional valve.
  • Connect the active charcoal filter pipe to the multifunctional valve.
  • Return the fuel inlet pipe and fuel vapours tank to the original positions.
  • Complete with Op. 7055B42 SUPPLEMENTARY WHEEL HOUSING (one) - R+R.
  • Lower the vehicle.
  • Complete with Op. 4450B11 Rear WHEEL (one) - R.R.
  • Insert the rubber into the fuel cap flap seat and lock the screws.
  • Connect the negative (-) battery terminal
NameConnector
-BatteryA1
  • Remove the vehicle from the hoist.

1080E20 - ACTIVE CHARCOAL FILTER FOR FUEL VAPOURS - R+R

Removal

  • Position the vehicle on a hoist.
  • Disconnect the battery (-) terminal

(Cont.)

Parts & tools for this job For 1998 Fiat Seicento

Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.