Fiat
Seicento Factory Service Manual (1998-2010)
10 Engine
Emission control system (1108)
Refitting
02 · Engine
Refitting
Make
Fiat
Model
Seicento Factory Service Manual
Year
1998–2010
Section
Emission control system (1108) › Refitting
10 Engine Refitting
(Cont. Op. 1080E20)
Follow Op. 4450B10 Front WHEEL (one) - R.R.
Follow Op. 7055B42 SUPPLEMENTARY WHEEL HOUSING (One) - R.R.
Remove the active charcoal filter pipe from the clasp on the wheel housing.
Remove the active charcoal filter from the support.
Disconnect the fuel vapours passage enable solenoid valve electrical connection
Name Connector
1 Fuel vapours recovery solenoid valve L10
Take out the pipe from the fuel vapours passage enable solenoid valve .
Take out the active charcoal filter pipe.
Remove the active charcoal filter.
Refitting
Insert the pipe onto the active charcoal filter.
Insert the pipe onto the fuel vapour passage enable solenoid valve.
Electrically connect the fuel vapours passage enable solenoid valve
Name Connector
- Fuel vapours recovery solenoid valve L10
Assemble the active charcoal filter on the support.
Fit the active charcoal filter pipe into the clasp on the wheel housing.
Complete with Op. 7055B42 SUPPLEMENTARY WHEEL HOUSING (one) - R.R.
Complete with Op. 4450B10 Front WHEEL (one) - R.R.
Connect the negative (-) battery terminal
Remove the vehicle from the hoist.
1080E28 - FUEL VAPOURS PASSAGE ENABLE SOLENOID VALVE TO INTAKE - R+R
Removal
Position the vehicle on a hoist.
Disconnect the negative (-) battery terminal.
Follow Op. 4450B10 Front WHEEL (one) - R.R.
Follow Op. 7055B42 SUPPLEMENTARY WHEEL HOUSING (One) - R.R.
Follow Op. 1080E20 Active charcoal FILTER for fuel vapours - R+R
(Cont.)
02 Engine
Parts & tools for this job For 1998 Fiat Seicento Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.