Operations

OPERATIONS

1080E12 - MULTIFUNCTIONAL VALVE - R+R WITH FUEL TANK REMOVED

Removal

• Position the vehicle on a hoist.
• Open the engine compartment.
• Disconnect the negative (-) battery terminal.

1. Unscrew the screws (1a) and take out the rubbers (1b) inside the fuel cap flap seat.

• Remove the rear right wheel (see Op. 4450B11 rear WHEEL (one) - R+R).
• Raise the vehicle.
• Remove the rear right supplementary wheel housing (see Op. 7055B42 SUPPLEMENTARY WHEEL HOUSING (one) - R+R

1. Move the fuel inlet pipe and the fuel vapours tank .
2. Disconnect the active charcoal filter pipe from the multifunctional valve .
3. Unscrew and remove the multifunctional valve.

Refitting

• Screw in the multifunctional valve.
• Connect the active charcoal filter pipe to the multifunctional valve.
• Return the fuel inlet pipe and fuel vapours tank to the original positions.
• Complete with Op. 7055B42 SUPPLEMENTARY WHEEL HOUSING (one) - R+R.
• Lower the vehicle.
• Complete with Op. 4450B11 Rear WHEEL (one) - R.R.
• Insert the rubber into the fuel cap flap seat and lock the screws.
• Connect the negative (-) battery terminal

• Close the engine compartment.
• Remove the vehicle from the hoist.

1080E20 - ACTIVE CHARCOAL FILTER FOR FUEL VAPOURS - R+R

Removal

• Position the vehicle on a hoist.
• Open the engine compartment.
• Disconnect the battery (-) terminal

(Cont.)