Workshop Manuals Factory service & repair Fiat
01 00 General information and technical data02 10 Engine03 18 Clutch04 21 Gearbox and differential05 27 Axle06 33 Braking system07 41 Steering08 44 Suspension and wheels09 50 Auxiliary units10 55 Electrical equipment11 70 Bodywork12 Diagnosis13 Tests14 Wiring diagrams
Fiat Seicento Factory Service Manual (1998-2010)02 · 10 Engine
02 · Engine

Refitting

Make
Fiat
Model
Seicento Factory Service Manual
Year
1998–2010
Section
Emission control system (899) › Refitting
10 EngineRefitting

Name Connector
- Battery A1

  • Remove the front left wheel (see Op. 4450B10 front WHEEL (one) - R+R).
  • Remove the front left supplementary wheel housing (see Op. 7055B42 SUPPLEMENTARY WHEEL HOUSING (one) - R+R).
  1. Remove the active charcoal filter pipe from the clasp on the wheel housing.
  2. Remove the active charcoal filter from the support.
Diagram showing the fuel vapours passage enable solenoid valve electrical connection with callout numbers 1 and 2
  1. Disconnect the fuel vapours passage enable solenoid valve electrical connection
NameConnector
1Fuel vapours recovery solenoid valveL10
  1. Take out the pipe from the fuel vapours passage enable solenoid valve.
  2. Take out the pipe from the active charcoal filter.
  3. Remove the active charcoal filter.
Diagram showing the active charcoal filter assembly with callout numbers 1, 2, 3, and 4

Refitting

  • Insert the pipe onto the active charcoal filter.
  • Insert the pipe onto the fuel vapour passage enable solenoid valve.
  • Electrically connect the fuel vapours passage enable solenoid valve
NameConnector
-Fuel vapours recovery solenoid valveL10
  • Assemble the active charcoal filter on the support.
  • Fit the active charcoal filter pipe into the clasp on the wheel housing.
  • Complete with Op. 7055B42 SUPPLEMENTARY WHEEL HOUSING (one) - R.R.
  • Complete with Op. 4450B10 Front WHEEL (one) - R.R.
  • Connect the negative (-) battery terminal
NameConnector
-BatteryA1
  • Close the engine compartment.
  • Remove the vehicle from the hoist.

1080E28 - FUEL VAPOURS PASSAGE ENABLE SOLENOID VALVE TO INTAKE - R+R

Removal

  • Position the vehicle on a hoist.
  • Open the engine compartment.
  • Disconnect the negative (-) battery terminal.
NameConnector
-BatteryA1
  • Remove the front left wheel (see Op. 4450B10 front WHEEL (one) - R+R).
  • Remove the front left supplementary wheel housing (see Op. 7055B42 SUPPLEMENTARY WHEEL HOUSING (one) - R+R).
  • Follow Op. 1080E20 Active charcoal FILTER for fuel vapours - R+R

(Cont.)

Parts & tools for this job For 1998 Fiat Seicento

Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.