Refitting
- Make
- Fiat
- Model
- Seicento Factory Service Manual
- Year
- 1998–2010
- Section
- Engine miscellaneous drives (1108) › Refitting
10 EngineRefitting
(Op. 1092A12 continued)
- Unscrew the crankshaft pulley screws.
- Remove the crankshaft pulley.
Refitting
- Fit the air conditioner compressor belt on the crankshaft pulley.
- Assemble the crankshaft pulley, fasten and tighten the screws to correct torque
| Fastening | Component | Ø | Value (daNm) | |
|---|---|---|---|---|
| - | Screw | CRANKSHAFT PULLEY | M8 | 2.5 |
- Reposition the air conditioner compressor belt tightener.
- Follow Op. 1092D14 Air conditioner compressor BELT - Tension adjustment
- Complete with Op. 7055B42 SUPPLEMENTARY WHEEL HOUSING (one) - R.R.
- Complete with Op. 4450B10 Front WHEEL (one - R.R.
- Connect the negative (-) battery terminal
| Name | Connector | |
|---|---|---|
| - | Battery | A1 |
- Remove the body protection cover.
- Remove the vehicle from the hoist.
Parts & tools for this job For 1998 Fiat Seicento
- PARTEngine gasket setSearch: Fiat Seicento 1998 engine gasket set
- TOOLTorque wrenchSearch: 3/8 inch torque wrench
- TOOLFeeler gauge setSearch: feeler gauge set
Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.