10 Engine Tensioning value of used belt · page 1 of 2
(Op. 1092D14 continued)
- Check the air conditioner compressor belt tension with the tool
Name Code - Dynamometer 1.895.762.000
Tensioning value of used belt
Measure Value - Tension (daN) 30 - 41
Tensioning value of new belt
Measure Value - Tension (daN) 48 - 60
- Tighten the compressor belt tightener screw to correct torque
Fastening Component Ø Value (daNm) - Screw COMPRESSOR BELT TIGHTENER M10 5.0
- Complete with
Op. 7055B42 SUPPLEMENTARY WHEEL HOUSING (one) - R.R.
- Complete with
Op. 4450B10 Front WHEEL (one) - R.R.
- Connect the negative (-) battery terminal
Name Connector - Battery A1
- Remove the body protection cover.
- Remove the vehicle from the hoist.
1092D16 - AIR CONDITIONER COMPRESSOR BELT TIGHTENER - R+R.
Removal
- Position the vehicle on a hoist.
- Assemble the body protection covers.
- Disconnect the negative (-) battery terminal.
Name Connector - Battery A1
- Follow
Op. 4450B10 Front WHEEL (one) - R.R.
- Follow
Op. 7055B42 SUPPLEMENTARY WHEEL HOUSING (one) - R.R.
1. Loosen the compressor belt tightener screw.
1. Unscrew screw (1a) fastening the compressor belt tightener (1b) and remove it.
Refitting
- Assemble the compressor belt tightener and tighten its screw to correct torque
Fastening Component Ø Value (daNm) - Screw COMPRESSOR BELT TIGHTENER M8 2.8
- Complete with
Op. 1092D14 Air conditioner compressor BELT - Tension adjustment
- Complete with
Op. 7055B42 SUPPLEMENTARY WHEEL HOUSING (one) - R.R.
(Cont.)
02 Engine
