Workshop Manuals Factory service & repair Fiat
Fiat Seicento Factory Service Manual (1998-2010)02 · 10 Engine
02 · Engine

Installation

Make
Fiat
Model
Seicento Factory Service Manual
Year
1998–2010
Section
Timing system control (1108 Euro 3) › Installation
10 EngineInstallation
Diagram showing the timing gear top guard with callout numbers 1 and 2

1108 Euro 3

  1. Remove the wiring from the timing gear top guard.
  2. Undo the bolts on the timing gear top guard.
  3. Remove the timing gear top guard.
Diagram showing the timing gear bottom guard with callout numbers 1, 2, and 3

1108 Euro 3

  1. Undo the bolts on the timing gear bottom guard.
  2. Remove the timing gear bottom guard.
Diagram showing engine components near the timing gear with callout numbers 1 and 2

Installation

1108 Euro 3

  • Fit the timing gear bottom guard and tighten the fixing bolts.
  • Fit the timing gear top guard and tighten the fixing bolts.
  • Fit the wiring on the timing gear top guard.
  • Refit the engine coolant reservoir and tighten the fixing bolts.
  • See Op. 5540B10 L/h or r/h headlamp (one) - r+r
  • See Op. 7055B42 Supplementary wheel arch (one) - r+r
  • See Op. 4450B10 Front or rear wheel (one) - r+r
  • Connect the negative (-) battery terminal.
DescriptionConnector
-BatteryA1
  • Remove the protective bodywork cover.
  • Remove the car from the ramp.

Parts & tools for this job For 1998 Fiat Seicento

Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.