1820a20 - release control hose - r+r.
- Make
- Fiat
- Model
- Seicento Factory Service Manual
- Year
- 1998–2010
- Section
- Clutch release control (1108) › 1820a20 - release control hose - r+r.
18 Clutch1820a20 - release control hose - r+r.
(Cont.d Op.1820A14)
Nota: The stroke corresponds to the distance between the position of the pedal at the end of its stroke (touching the wall) and the released position. Measure the stroke on the pedal centre line.
| Measure | Value | |
|---|---|---|
| 1b | Stroke (mm) | 120±5 |
- Slacken the locknut (1a) of the clutch release control hose (1b)on the gearbox side.
- Tighten or loosen the nut to adjust the pedal stroke to the specified value.
- Settle the clutch pedal pressing it completely 2 or 3 times.
- Check the clutch pedal stroke again.
- Tighten the locknut.
- Close the engine compartment.
1820A20 - RELEASE CONTROL HOSE - R+R.
Removal
- Set the car on the car lift.
- Open the engine compartment.
- Assemble the car body protection covers.
- Disconnect the battery(-) terminal
| Description | Connector | |
|---|---|---|
| - | Battery | A1 |
- Disconnect the clutch release control hose from the thrust bearing control linkage.
- Disconnect the end of the clutch release control hose from the clutch pedal.
(Cont.d)
Parts & tools for this job For 1998 Fiat Seicento
- PARTClutch kitSearch: Fiat Seicento 1998 clutch kit
- TOOLClutch alignment toolSearch: clutch alignment tool
- FLUIDGear oilSearch: Fiat Seicento manual gearbox oil
Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.