Refitting

(Cont. Op. 1820A20)

Refitting

• Insert the clutch release control hose and fasten it with the corresponding nuts.
• Lower the vehicle.
• Collegare l'estremità del flessibile del comando disinnesto frizione al rinvio pedale frizione.
• Refit the transmission guard and fasten the 3 screws.
• Perform Op. 7040A10 - Dashboard panel - R.R.
• Perform Op. 7040L40 - Front door frame foot-board (ONE), LH or RH, R.R.
• Perform Op. 5010C38 - Side air vent (ONE) LH or RH on dashboard R.R.
• Perform Op. 7040A37 - Fuse box cover on dashboard - R.R.
• Perform Op. 5040D22 - Climate control support (ONE)
• Perform Op. 7065C10 - CLIMATE CONTROL TAG - r.r.
• Perform Op. 7005M10 - SWITCH (ONE) window winder control on one front door, LH or RH, R.R.
• Perform Op. 7065C54 - RADIO COMPARTMENT R.R.
• Perform Op. 5560B10 - ANALOG INSTRUMENT PANEL - r.r.
• Perform Op. 5520A10 - Ignition switch complete - R.R.
• Perform Op. 5550A10 - STEERING COLUMN STALK complete R.R.
• Perform Op. 7040A26 - Steering column panel R.R.
• Perform Op. 4110A10 - STEERING WHEEL - R.R. for replacement or checks
• Perform Op. 5550B10 - Horn control on steering wheel - R.R.
• Connect the clutch release control hose to the thrust bearing control levers.
• Perform Op. 1820A14 CLUTCH PEDAL - Stroke adjustment.
• Connect the battery (-) terminal.

• Remove the body protection cover.
• Close the engine compartment.
• Remove the vehicle from the shop jack.