Reassembly

(Cont.d Op. 1820A26)

2. Remove the external linkage (2a) and bush (2b) of the clutch thrust bearing.

1. Remove the internal linkage (1a) and bush (1b) of the clutch thrust bearing.

Nota: The clutch thrust bearing internal bush should be removed only in the case of replacement.

Reassembly

Note: Change the bushes if the clutch thrust bearing control linkage has too much play.

1. Assemble the clutch thrust bearing control linkage inner bush (1a) using tool (1b)

1. Assemble the internal linkage (1a), external bush (1b) and external linkage (1c) of the clutch thrust bearing control.

Nota: Assemble the bush with the protrusion inserted in its seat on the gearbox. The external and internal parts of the clutch thrust bearing control linkage have a positioning notch.

2. Assemble the retainer ring of the clutch thrust bearing external control linkage.

• Assemble the clutch thrust bearing.

Nota: Assemble the clutch thrust bearing with the shorter fins placed vertically.

(Cont.d)