5570t10 - radio support - r.r.

• Remove rings, wrist watches or other metal objects.
• Before intervening on the electric system (connectors, electric devices, wiring, etc.) DISCONNECT THE BATTERY.
• Beware of electric arcs. Although the battery voltage is 12V, the battery can output high currents in the event of a short circuit. This can cause arcs or sparks which can be dangerous to the operator or could be the cause of fire.
• Beware of high voltage. The electronic ignition system can generate voltages of 20,000V or more. This can be extremely dangerous. Work with extreme caution on or near components.
• Beware of fire. Never smoke when working near the battery or components subject to heating during operation (e.g. halogen lights) nor in the engine compartment when the engine is warm. Avoid burns or damage to tools and components.

5570T10 - RADIO SUPPORT - R.R.

Removal

• Perform Op. 5570T80 - RADIO - r.r.

1. Lift and remove the two radio support elements.

Reassembly

• Check that the radio support is not damaged.
• Position the two radio support elements in their seat.
• Complete with Op. 5570T80 - RADIO - r.r.

5570T31 - RADIO AERIAL COAXIAL CABLE - R.R.

Removal

• Perform Op. 5570T80 - RADIO - r.r.
• Perform Op. 7065C30 - HANDLE (one), LH or RH inside passenger compartment - r.r. (right-hand side)
• Perform Op. 7065C34 - SUNVISOR (one), LH or RH - r.r. (left and right-hand side)
• Perform Op. 7065C68 - DRIVING MIRROR - r.r.
• Perform Op. 7040E10 - FRONT CEILING LIGHT - r.r.
• Perform Op. 7030H28 - TOP SLIDING MOTOR - r.r.
• Perform Op. 7055A62 - RISER GROVE, LH or RH - r.r. (left and right-hand side)

1. Lift the roof panel front left-hand fastening button with the specific tool.

2. Lift the sunroof seal (2a) as required.
3. Lift the door frame seal (3a) as required.
4. Lower the front roof panel slightly.

(Cont..)