Reassembly

(Op. 5570T31 continued)

1. Disconnect the radio aerial wire.
2. Release the radio aerial wire from the retainers on the roof and on the front right-hand riser.

1. From under the dashboard panel, disconnect the aerial wire from the retainers on the crossmember.
2. Extract the aerial wire.

Reassembly

• Check that the radio aerial is not damaged.
• If required, check electric continuity of conductor and shielding.
• Reposition the radio aerial wire in its seat.
• Fasten the wire to the retainers.
• Connect the aerial wire connection.
• Reposition the roof panel in its seat.
• Fit the sunroof seal in its seat.
• Fit the door frame seal in its seat.
• Fit the left-hand front roof panel buttons.
• Complete with Op. 7055A62 - RISER GROOVES, LH or RH - r.r. (left and right-hand side)
• Complete with Op. 7030H28 - TOP SLIDING MOTOR GUARD - r.r.
• Complete with Op. 7040E10 - FRONT CEILING LIGHT - r.r.
• Complete with Op. 7065C68 - DRIVING MIRROR - r.r.
• Complete with Op. 7065C34 - SUNVISOR (one), LH or RH - r.r. (left and right-hand side)
• Complete with Op. 7065C30 - HANDLE (one), LH or RH inside passenger compartment - r.r.
• Complete with Op. 5570T80 - RADIO - r.r.
• Check sound system operation.

5570T31 - RADIO AERIAL COAXIAL CABLE - R.R.

Removal

• Perform Op. 5570T80 - RADIO - r.r.
• Perform Op. 7065C30 - HANDLE (one), LH or RH inside passenger compartment - r.r. (right-hand side)
• Perform Op. 7065C34 - SUNVISOR (one), LH or RH - r.r. (right-hand side)
• Perform Op. 7065C68 - DRIVING MIRROR - r.r.
• Perform Op. 7040E10 - FRONT CEILING LIGHT - r.r.
• Perform Op. 7030H28 - TOP SLIDING MOTOR GUARD - r.r.
• Perform Op. 7055A62 - RISER GROOVE, LH or RH - r.r. (right-hand side)

1. Remove the screws.
2. Shift the volumetric sensor support.

(Cont..)