Refitting

1. Work from outside the vehicle using the vibrating knife (1a) with blade (1b) and complete the sealant cut along the lower perimeter (1c), apply the suction cup handles on the rear window (1d) and with the help of a second operator remove the rear window (1e).

Refitting

1. Cut and level the cord of sealant(1a) in rear window compartment so as to leave a thickness (1b) between 0,25 and 1 mm.

Note: The sealant thickness remained on the rear window compartment will be a support for a new glueing.

• Carefully clean the rear window seat with compressed air and degrease thoroughly with heptane and disposable paper.

• Check the window in order to verify it is not damaged.
• Degrease the spare part silk-screened perimeter with heptane and disposable paper.

1. Clean the silk screened area(1a) with a pad of paper (1b) soaked in degreaser adhesion promotor (1c).

1. Using the special pad (1a) apply the adherence promotor (1b) on the silk screened perimeter (1c) of the spare part.

(Cont..)