Workshop Manuals Factory service & repair Fiat
01 00 General information and technical data02 10 Engine03 18 Clutch04 21 Gearbox and differential05 27 Axle06 33 Braking system07 41 Steering08 44 Suspension and wheels09 50 Auxiliary units10 55 Electrical equipment11 70 Bodywork12 Diagnosis13 Tests14 Wiring diagrams
Fiat Seicento Factory Service Manual (1998-2010)12 · Diagnosis
12 · Diagnostics

Door closing faulty

Make
Fiat
Model
Seicento Factory Service Manual
Year
1998–2010
Section
Doors › Door closing faulty
DiagnosisDoor closing faulty · page 1 of 2
Diagnosis table Symptom / conditions Test results
Step Validity Operation to be performed
P01

Door closing faulty

Operating the door locking device, with the key or with the remote control, or locking a door from inside the car with the safety knob, one of the doors fails to lock correctly.

(if a door does not lock correctly when the door locking device is operated, the doors may lock and be unlocked straight after)

If the doors do not lock at all, see Tables P10, P11

⚠ 🔧
1 CHECK LOCK STRIKER All OK Check correct fastening of lock striker Go to Step 2 Problems found
Incorrect lock striker fastening
Intervention
Restore correct lock striker fastening
PROCEDURE OP. 7005A10
2 CHECK KEY OPERATION All OK Check the doors open/close correctly with the key Go to Step 3 Problems found
Faulty tierods
Intervention
Restore correct coupling of tierods on outer handle and lock
PROCEDURE OP. 7005C42
Incorrect lock fastening Restore correct fastening of lock on door
PROCEDURE OP. 7005N21
3 CHECK DOOR KNOB OPERATION All OK Check the doors open/close correctly when operating the safety knob Go to Step 4 Problems found
Faulty tierods
Intervention
Restore correct coupling of lock tierod
PROCEDURE OP. 7005C67
Incorrect lock fastening Restore correct door lock fastening
PROCEDURE OP. 7005N21

(Cont..)

Original page

Parts & tools for this job For 1998 Fiat Seicento

Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.