Door closing faulty (page 2 of 2)
- Make
- Fiat
- Model
- Seicento Factory Service Manual
- Year
- 1998–2010
- Section
- Doors
DiagnosisDoor closing faulty · page 2 of 2
| Step | Validity | Operation to be performed | Test results | ||
|---|---|---|---|---|---|
| OK | ⚠ | 🔧 | |||
| 4 | CHECK OUTER HANDLE OPERATION | All OK | Problems found | Intervention | |
| Check the doors open/close correctly when operating the outer handle (with safety knobs not engaged) | Go to Step 5 | Faulty tierods | Restore correct coupling of tierods on outer handle and lock PROCEDURE OP. 7005C42 | ||
| Incorrect lock fastening | Restore correct lock fastening on door PROCEDURE OP. 7005N21 | ||||
| 5 | CHECK INNER HANDLE OPERATION | All OK | Problems found | Intervention | |
| Check doors open/close correctly when the outer handle is operated | Go to Step 6 | Faulty inner handle tierods | Restore correct coupling of tierod to handle PROCEDURE OP. 7005C55 | ||
| Faulty tierods | Restore correct fastening of tierod to lock PROCEDURE OP. 7005C51 | ||||
| 6 | CHECK CORRECT OPERATION | All OK | Problems found | Intervention | |
| Check the fault is no longer present | End of test | – | – | ||
Parts & tools for this job For 1998 Fiat Seicento
- TOOLTrim removal tool kitSearch: trim removal tool kit
- PARTTouch-up paintSearch: Fiat touch up paint
- PARTPanel clip assortmentSearch: Fiat panel clips assortment
Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.