C01 Stiff gearshift
- Make
- Fiat
- Model
- Seicento Factory Service Manual
- Year
- 1998–2010
- Section
- Gear shifting › C01 Stiff gearshift
DiagnosisC01 Stiff gearshift
C01 Stiff gearshift
It is difficult to engage gears, in all circumstances.
| Step | Validity | Operation to be performed | Test results | ||
|---|---|---|---|---|---|
| OK | ⚠ | 🔧 | |||
| 1 | CHECK GEARBOX CONTROL WIRE FASTENING Check the gearbox wire fastening: wires must not be loose or incorrectly fastened. |
All OK Go to Step 2 |
Problems found Wires assembled incorrectly |
Intervention Restore correct control wire fastening. PROCEDURE 2125C |
|
| 2 | CHECK GEARBOX CONTROL WIRES Check the gearbox wires: neither the ball joints or the bush should be worn. |
All OK Go to Step 3 |
Problems found Worn ball joints |
Intervention Replace control wires PROCEDURE 2125C |
|
| 3 | CHECK GEARBOX LEVER BALL Check the gearbox lever ball: it should not be worn. |
All OK Go to Step 4 |
Problems found Ball worn |
Intervention Replace the gearbox lever OP. PROCEDURE 2125A10 |
|
| 4 | CHECK CORRECT OPERATION Check the fault has been repaired. |
All OK End of test |
Problems found – |
Intervention – |
|
Parts & tools for this job For 1998 Fiat Seicento
- TOOLTorque wrenchSearch: 3/8 inch torque wrench
- TOOLSocket setSearch: socket set metric
- BOOKHaynes manualSearch: Haynes manual Fiat Seicento
Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.