Battery DRIP TRAY/SUPPORT - R.R.

Operation 5530B52 · Battery and leads

Removing

- 5530B56 BATTERY DRIP TRAY COVER - R.R.

1.9 JTD 16v

Disconnect the electrical connections for the engine management control unit.

Release the wiring from the retaining bands.

1. Undo the rear fixing bolt (1a), release the front fixings (1b) and move aside the engine compartment junction unit (1c).

1. Disconnect the dashboard/engine electrical connection.

1. Remove the battery tray (1a) and battery container (1b) from their seatings on the cage.

1. Slacken the strut bolts.

2. Undo the bolt to the air filter (2a) and suspension dome (2b).

3. Remove the battery cage.

All versions

Refitting

Position the battery cage in its seating and tighten the fixing bolts to the specified torque.

Position the battery container and fit it in its seatings on the battery cage.

Reconnect the dashboard/engine electrical connection.

Position the engine compartment junction unit, embed the front fixings and tighten the fixing bolt.

Position the battery tray.

1.9 JTD 16v

Connect the electrical connections for the engine management control unit.

- 5530B56 BATTERY DRIP TRAY COVER - R.R.