Alternator drive belt - r + r

Operation 1092B60 · Water pump and alternator drive

1.2 16v

Removing

Place the car on a ramp.

- 5530B56 BATTERY DRIP TRAY COVER - R.R.

Disconnect the battery negative terminal.

- 7055B42 Additional FRONT WHEEL ARCH (one), left or right - R.R.

1. Loosen the lower alternator retaining nuts.

Lower the lift.

2. Loosen the alternator upper nut.

Rotate the alternator clockwise and remove the belt.

1.4 16v

Removing

Place the car on a lift.

- 5530B56 BATTERY DRIP TRAY COVER - R.R.

Disconnect the battery negative terminal.

- 7055B42 Additional FRONT WHEEL ARCH (one), left or right - R.R.

1. Loosen the lower alternator retaining nuts.

Lower the ramp.

2. Loosen the alternator upper nut.

Rotate the alternator clockwise and remove the belt

1.2 16v

Refitting

Check belt condition. In particular, check for tears, cracks, surface wear and dry or hard parts that could lead to loss of grip. Change the belt if one of these defects is noted.

Fit the new alternator drive belt on the pullies.

Rotate the alternator anticlockwise and secure it with the retaining bolts.

- 1092B64 alternator drive belt - adjust tension

- 7055B42 Additional FRONT WHEEL ARCH (one), left or right - R.R.

Connect the battery negative terminal.

- 5530B56 BATTERY DRIP TRAY COVER - R.R..

Remove the vehicle from the ramp.

1.4 16v

Refitting

Check belt condition. In particular, check for tears, cracks, surface wear and dry or hard parts that could lead to loss of grip. Change the belt if one of these defects is noted.

Fit the new alternator drive belt on the pullies

Rotate the alternator anticlockwise and secure it with the retaining bolts.

- 1092B64 alternator drive belt - adjust tension

- 7055B42 Additional FRONT WHEEL ARCH (one), left or right - R.R.

Connect the battery negative terminal.

- 5530B56 BATTERY DRIP TRAY COVER - R.R..

Remove the vehicle from the lift.