Autoclose not working / vehicle with passive entry
- Make
- Fiat
- Model
- Stilo Factory Service Manual
- Year
- 2001–2007
- Section
- Doors › Autoclose not working / vehicle with passive entry
‹ Prev Doors / boot open buzzer not present with car in motionNext › Doors do not open / vehicle with passive entry
Fault diagnosisAutoclose not working / vehicle with passive entry
AUTOCLOSE NOT WORKING / VEHICLE WITH PASSIVE ENTRY
The autoclose system does not work when the driver closes the door and walks away from the car.
The autoclose function can be selected from the instrument panel node nad allows the CID owner to lock the door catch automatically when he or she moves away from the car.
| Results of the tests | ||||
| 0 | PRELIMINARY CHECK | All OK | Problems met | Operation |
|---|---|---|---|---|
| Check that the autoclose function activates via the instrument panel node. | Continue to Step 1 | Function deactivated | Activate the function via the instrument panel node | |
| 1 | CHECKING WITH DIAGNOSTIC EQUIPMENT | All OK | Problems met | Operation |
| Connect an Examiner and check the door open/close signal has been correctly downloaded while in parameter mode. Carry out the check on each individual door. | Continue to Step 3 | Door open/close signal missing | Continue to Step 2 | |
| 2 | CHECKING ELECTRICAL CIRCUIT | All OK | Problems met | Operation |
| Check continuity/insulation of electrical connection between body computer node and door lock See E7018 PASSIVE ENTRY | Continue to Step 6 | Electrical connection interrupted or not insulated | Restore continuity/insulation of electrical connection See E7018 PASSIVE ENTRY | |
| 3 | CHECKING WITH DIAGNOSTIC EQUIPMENT | All OK | Problems met | Operation |
| Keep the Examiner connected and check for errors in the passive entry aerials on the doors | Continue to Step 7 | Error found in one door aerial | Continue to Step 4 | |
| 4 | CHECKING ELECTRICAL CIRCUIT | All OK | Problems met | Operation |
| Check continuity/insulation of electrical connection between aerial and passive entry node | Continue to Step 5 | Electrical connection interrupted or not insulated | Restore continuity/insulation of electrical connection See E7018 PASSIVE ENTRY | |
| 5 | CHECKING CORRECT OPERATION | All OK | Problems met | Operation |
| Check that the fault is no longer present | End of diagnosis | The fault persists | Replace front door passive entry aerial Op. 5580E72 | |
| The fault persists | Replace rear door passive entry aerial Op. 5580E74 | |||
| 6 | CHECKING CORRECT OPERATION | All OK | Problems met | Operation |
| Check that the fault is no longer present | End of diagnosis | The fault persists | Change the defective front door catch Op. 7021N72 | |
| The fault persists | Change the defective rear door catch Op. 7010N21 | |||
| 7 | CHECKING CORRECT OPERATION | All OK | Problems met | Operation |
| Check that the fault is no longer present | The fault persists | Change the passive entry node Op. 5580E70 Search for the fault starting from another symptom' | ||
‹ Prev Doors / boot open buzzer not present with car in motionNext › Doors do not open / vehicle with passive entry
Parts & tools for this job For 2001 Fiat Stilo
- TOOLTrim removal tool kitSearch: trim removal tool kit
- PARTTouch-up paintSearch: Fiat touch up paint
- PARTPanel clip assortmentSearch: Fiat panel clips assortment
Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.