PASSIVE ENTRY system CONTROL UNIT - R.R.

Operation 5580E70 · Anti-theft device

Removing

- 5530B56 BATTERY DRIP TRAY COVER - R.R.

Disconnect the battery negative terminal.

- 7040L33 ARMREST ON TUNNEL COVER WITH ODDMENTS POCKET - R.R.

- 3380A46 handbrake lever protective boot - r r

1.2 16v, 1.6 16v, 1.8 16v, 1.9 JTD 8v

- 2125C26 lever/knob cover - r+r for versions with reverse engagement device

2.4 20v

- 7040L37 gear lever plate - r r

- 7040A65 passenger compartment box lock, one, r r

- 7065C42 ashtray (one) r+r

- 5010C32 air outlet on panel trim for rear seats - r r

- 7040L70 TUNNEL COVER REAR TRIM - R.R.

- 7040L20 tunnel trim - r r

1. Undo the fixing nuts (1a), then disconnect the electrical connection (1b) for the passive entry system control unit.

2. Remove the passive entry system control unit.

All versions

Refitting

Place the passive entry system control unit in its original position and tighten the fixing nuts.

Connect the electrical connection for the passive entry system control unit.

- 7040L20 tunnel trim - r r

- 7040L70 TUNNEL COVER REAR TRIM - R.R.

- 5010C32 air outlet on panel trim for rear seats - r r

- 7065C42 ashtray (one) r+r

- 7040A65 passenger compartment box lock, one, r r

2.4 20v

- 7040L37 gear lever plate - r r

1.2 16v, 1.6 16v, 1.8 16v, 1.9 JTD 8v

- 2125C26 lever/knob cover - r+r for versions with reverse engagement device

- 3380A46 handbrake lever protective boot - r r

- 7040L33 ARMREST ON TUNNEL COVER WITH ODDMENTS POCKET - R.R.

Connect the battery negative terminal.

- 5530B56 BATTERY DRIP TRAY COVER - R.R.