Tunnel trim - r r

Operation 7040L20 · Cabin floor covering

Removing

- 5530B56 BATTERY DRIP TRAY COVER - R.R.

Disconnect the battery negative terminal.

- 7040L33 ARMREST ON TUNNEL COVER WITH ODDMENTS POCKET - R.R.

- 3380A46 handbrake lever protective boot - r r

- 7040L37 gear lever plate - r r

- 7040A65 passenger compartment box lock, one, r r (front and left sides)

- 7065C42 ashtray (one) r+r

- 5010C32 air outlet on panel trim for rear seats - r r

- 7040L70 TUNNEL COVER REAR TRIM - R.R.

1. Undo the rear bolts (1a) fixing the tunnel cover (1b).

1. Undo the front bolts fixing the tunnel cover.

Lift up the tunnel cover.

2. Disconnect the electrical connector for the switch unit on the tunnel.

3. Disconnect the electrical connector for the cigar lighter.

Remove the tunnel cover.

1. Remove the gear lever trim mounting.

Refitting

Insert and fix the springs retaining the trim mounting in the special housing.

Connect the electrical connector for the cigar lighter.

Connect the electrical connector for the switch unit on the tunnel.

Tighten the front bolts fixing the tunnel cover.

Tighten the rear bolts fixing the tunnel cover.

- 7040L70 TUNNEL COVER REAR TRIM - R.R.

- 5010C32 air outlet on panel trim for rear seats - r r

- 7065C42 ashtray (one) r+r

- 7040A65 passenger compartment box lock, one, r r (front and left sides)

- 7040L37 gear lever plate - r r

- 3380A46 handbrake lever protective boot - r r

- 7040L33 ARMREST ON TUNNEL COVER WITH ODDMENTS POCKET - R.R.

Connect the battery negative terminal.

- 5530B56 BATTERY DRIP TRAY COVER - R.R.