Rear panel - r r

Operation 7040H50 · Roof panel lining

3 doors

Removing

- 7050A22 rear seat cushion - r+r

1. Lift up the rear seat cushion (1b) using the special rod (1a).

1. Undo the bolt (1a) fixing the lower rod anchoring the rear side seat belt (1b).

2. Undo the lower bolts fixing the side panel.

1. Remove the front door housing seal from its seat.

2. Remove the front door running board in the area in contact with the rear side panel, as necessary.

Completely lower the rear seat backrest.

1. Undo the side bolt fixing the rear side panel.

1. Using a special knife, remove the rear side panel (1a) releasing the inner retaining buttons (1b).

Refitting

Fit the rear side panel in position, checking that the inner retaining buttons are correctly inserted in their housings.

Tighten the side bolt fixing the rear side panel.

Reposition the rear seat backrest.

Reposition the front door running board and the front door housing seal.

Tighten the lower bolts fixing the rear side panel.

Tighten the bolts fixing the lower rod anchoring the rear side seat belt to torque.

Reposition the rear seat cushion.

- 7050A22 rear seat cushion - r+r