Parcel rack mounts-fastening
- Make
- Fiat
- Model
- Stilo Factory Service Manual
- Year
- 2001–2007
- Section
- Bodyshell interior trims and fittings › Parcel rack mounts-fastening
Parcel rack mounts-fastening
Removing
- 5530B56 BATTERY DRIP TRAY COVER - R.R.
Disconnect the battery negative terminal.
- 7050A22 rear seat cushion - r+r
- 7040H68 (ONE), TAILGATE HOUSING PILLAR TRIM LEFT OR RIGHT - R.R.
1. Remove the luggage compartment light (1a) from its housing and disconnect the electrical connector (1b).
| Name | Connector | |
|---|---|---|
| 1b | Boot courtesy light | G40 |
1. Undo the fixing bolts (1a) and remove the rear parcel shelf support (1b).
Disconnect the electrical connector for the rear current socket.
| Name | Connector | |
|---|---|---|
| Rear power point | P52 |
Refitting
Connect the electrical connector for the rear current socket.
| Name | Connector | |
|---|---|---|
| Rear power point | P52 |
Fit the rear parcel shelf support in its housing and tighten the fixing bolts.
Connect the electrical connector and fit the luggage compartment light in its housing.
| Name | Connector | |
|---|---|---|
| Boot courtesy light | G40 |
- 7040H68 (ONE), TAILGATE HOUSING PILLAR TRIM LEFT OR RIGHT - R.R.
- 7050A22 rear seat cushion - r+r
Connect the battery negative terminal.
Parts & tools for this job For 2001 Fiat Stilo
- TOOLTie rod end toolSearch: tie rod end puller
- TOOLBall joint separatorSearch: ball joint separator
- FLUIDPower steering fluidSearch: Fiat power steering fluid
Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.