Flap assembly - r r

Operation 7040A31 · Passenger compartment trim

Removing

- 5530B56 BATTERY DRIP TRAY COVER - R.R.

Disconnect the battery negative terminal.

- 7040A45 facia rh side cover - r r

1. Undo the fixing bolts (1a) and release the rods for the compartment flap (1b) from the housing.

2. Remove the compartment from the housing.

Disconnect the electrical connector for the glove compartment light.

1. Disconnect the electrical connectors for the aerial cable loom.

Release the aerial cable loom from the retaining springs.

Refitting

Connect the electical connectors for the aerial cable loom.

Secure the aerial cable loom to the retaining springs.

Connect the electrical connector for the glove compartment light.

Fit the compartment and place the flap rods in position.

Tighten the compartment fixing bolts.

- 7040A45 facia rh side cover - r r

Connect the battery negative terminal.

- 5530B56 BATTERY DRIP TRAY COVER - R.R.