1072 inlet and exhaust manifolds
- Make
- Fiat
- Model
- Stilo Factory Service Manual
- Year
- 2001–2007
- Section
- 10 engine › 1072 inlet and exhaust manifolds
Tightening torques1072 inlet and exhaust manifolds
1072 INLET AND EXHAUST MANIFOLDS
| Component | Fastening | Ø | Value (daNm) | Validity |
|---|---|---|---|---|
| CATALYTIC CONVERTER (ONE) | Bolt | M8 | 2.7 | 1.2 16v |
| CATALYTIC CONVERTER (ONE) | Nut | M8 | 2.5 | 1.2 16v |
| CATALYTIC CONVERTER (ONE) | Nut | M10 | 4.5 | 1.2 16v |
| CATALYTIC CONVERTER (ONE) | Bolt | M8 | 2.5 | 1.4 16v |
| CATALYTIC CONVERTER (ONE) | Nut | M10 | 2.5 | 1.4 16v |
| EXHAUST MANIFOLD WITH CATALYTIC CONVERTER | Bolt | M8 | 2,5 | 1.6 16v |
| EXHAUST MANIFOLD WITH CATALYTIC CONVERTER | Nut | M8 | (Cylinder head side) 10 + 60˚±3˚ | 1.6 16v |
| EXHAUST MANIFOLD WITH CATALYTIC CONVERTER | Nut | M8 | 2,5 | 1.6 16v |
| EXHAUST MANIFOLD/S | Nut | M8 | 1.5 + 30˚ | 1.4 16v |
| EXHAUST MANIFOLD/S | Nut | M8 | 2.3 ÷ 2.8 | 1.6 16v |
| EXHAUST MANIFOLD/S | Bolt | M10 | 4.5 | 1.8 16v |
| EXHAUST MANIFOLD/S | Nut | M8 | (Cylinder head side) 2.1 ÷ 2.6 | 1.8 16v |
| EXHAUST MANIFOLD/S | Nut | M8 | (Cylinder head side) 2.5 | 1.8 16v |
| EXHAUST MANIFOLD/S | Nut | M8 | 2 | 1.9 JTD 8v |
| EXHAUST MANIFOLD/S | Nut | M8 | (Cylinder head side) 2.3 ÷ 3.3 | 1.9 JTD 8v 2.4 20v |
| EXHAUST MANIFOLD/S | Nut | M8 | 2.5 | 1.9 JTD 16v |
| EXHAUST MANIFOLD/S | Nut | M8 | (to the catalytic converter) 2.5 | 2.4 20v |
| EXHAUST MANIFOLD/S | Nut | M8 | 1 + 60˚ | 2.4 20v |
| EXHAUST MANIFOLD/S | Nut | M8 | 2.8 | 2.4 20v |
| EXHAUST MANIFOLD/S | Nut | M8 | 2.8 | 2.4 20v |
| INLET AIR DUCT | Bolt | M7 | (Cylinder head side) 1.3 - 1.6 | 1.6 16v |
| INLET AIR DUCT | Bolt | M7 | 1.4 ÷ 1.7 | 1.6 16v |
| INLET AIR DUCT | Nut | M8 | 2.5 | 1.9 JTD 16v |
| INLET MANIFOLD | Nut | M7 | 1.5 | 1.2 16v 1.4 16v |
| INLET MANIFOLD | Bolt | M6 | 0.7 | 1.4 16v |
| INLET MANIFOLD | Bolt | M7 | 1.5 | 1.4 16v |
| INLET MANIFOLD | Bolt | M8 | (Cylinder head side) 2,1 - 2,6 | 1.6 16v |
| INLET MANIFOLD | Nut | M8 | (cylinder head side) 2,1 - 2,6 | 1.6 16v |
| INLET MANIFOLD | Nut | M8 | 2.3 ÷ 2.8 | 1.6 16v |
| INLET MANIFOLD | Nut | M8 | 2.3 ÷ 2.8 | 1.6 16v |
| INLET MANIFOLD | Nut | M8 | (Cylinder head side) 2.1- 2.6 | 1.8 16v |
| INLET MANIFOLD | Nut | M8 | 2.5 | 1.9 JTD 8v |
| INLET MANIFOLD | Nut | 2.3 - 3.3 | 1.9 JTD 8v | |
| INLET MANIFOLD | Nut | M8 | (Cylinder head side) 2.3 ÷ 3.3 | 2.4 20v |
| INLET MANIFOLD | Nut | M8 | 2.5 | 2.4 20v |
| LH MANIFOLD HEAT SHIELD BULKHEAD | Bolt | M6 | 0.9 | 1.9 JTD 16v |
| LH MANIFOLD HEAT SHIELD BULKHEAD | Nut | M6 | 0.9 | 1.9 JTD 16v |
Parts & tools for this job For 2001 Fiat Stilo
- PARTExhaust gasketSearch: Fiat Stilo 2001 exhaust gasket
- TOOLPenetrating oilSearch: penetrating oil
- TOOLOBD2 scannerSearch: OBD2 scanner
Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.