1080 exhaust emission control system
- Make
- Fiat
- Model
- Stilo Factory Service Manual
- Year
- 2001–2007
- Section
- 10 engine › 1080 exhaust emission control system
Tightening torques1080 exhaust emission control system
1080 EXHAUST EMISSION CONTROL SYSTEM
| Component | Fastening | Ø | Value (daNm) | Validity |
|---|---|---|---|---|
| CATALYTIC CONVERTER (ONE) | Nut | M8 | (To the flexible centre section) 2.5 | 2.4 20v |
| CATALYTIC CONVERTER (ONE) | Nut | M8 | 2.5 | 2.4 20v |
| CATALYTIC PRE-CONVERTER | Nut | M8 | 2.5 | 1.9 JTD 8v 2.4 20v |
| CATALYTIC PRE-CONVERTER | Bolt | M10 | 2.5 | 1.9 JTD 16v |
| CATALYTIC PRE-CONVERTER | Bolt | M8 | (Mounting bracket) 2.5 | 1.9 JTD 16v |
| CONVERTER FRONT LAMDBA SENSOR | Lambda probe | M8 x 1.5 | 4.5 | 1.2 16v |
| CONVERTER REAR LAMBDA SENSOR | Lambda probe | M8 x 1.5 | 4.5 | 1.2 16v |
| CONVERTER REAR LAMBDA SENSOR | M18 x 1.5 | (Manifold side) 4,5 | 1.6 16v | |
| EGR VALVE PIPE | Bolt | M8 | 2.5 | 1.9 JTD 8v |
| LAMBDA PROBE | M18 | 4.1 ÷ 5.0 | 1.8 16v | |
| LAMBDA PROBE | M18 x 1.5 | 4.5 | 2.4 20v | |
| LEFT LAMBDA SENSOR | M18 | (Exhaust manifold side) 4.1 ÷ 5.0 | 1.8 16v | |
| PRECONVERTER MOUNTING BRACKET | Nut | M8 | (Oil sump) 2.5 | 1.9 JTD 16v |
| RIGHT LAMBDA SENSOR | M18 | (Exhaust manifold side) 4.1 ÷ 5.0 | 1.8 16v | |
| WATER/GAS HEAT EXCHANGER FOR EGR SYSTEM | M8 x 1.25 | 25 | 1.9 JTD 16v |
Parts & tools for this job For 2001 Fiat Stilo
- PARTExhaust gasketSearch: Fiat Stilo 2001 exhaust gasket
- TOOLPenetrating oilSearch: penetrating oil
- TOOLOBD2 scannerSearch: OBD2 scanner
Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.