INTEGRATED RADIO PHONE - Description

Description

In the version with integrated CONNECT radio-telephone-navigator, the telephone (GSM module and SIM-CARD reader) is integrated in the unit.

This system includes:

• GSM module and SIM-CARD reader integrated in the radio-telephone-navigator;
• hands-free function via the radio speakers;
• microphone located in the front courtesy light;
• outside aerial.

An additional outside telephone receiver can be fitted, on request, which switches automatically to the hands free system.

The integrated radio-telephone-navigator is a node of the CAN network through which it exchanges information with the Body Computer and other electronic units.

The commands of the telephone function are grouped together on a conventional telephone keyboard (12 buttons), with in addition dedicated keys for emergency call.

The commands are displayed on the integrated radio-telephone-navigator display.

Some versions have a set of buttons located on the steering wheel: these, in addition to the radio controls, allow commands to be sent for the telephone function.

There is also the 'voice recognition' function: this is an internal voice recognition module which acquires the commands received from the microphone and interprets them, sending them to the telephone unit proper.

The fishpole antenna is mounted at the rear of the roof: this is a two-function aerial with two cables: one is the actual radio aerial, and one is the telephone cable with dual reception band (GSM-ETACS at 900 Hz and D.C.S. at 1800 Hz).

If the navigator is also installed See E4091 CONNECT, the aerial has three functions (radio/GSM/GPS).

An additional outside telephone receiver can be fitted, on request, which switches automatically to the hands free system.

For more details on the operation of the telephone