Fuel filler pipe CAP - R.R.
- Make
- Lancia
- Model
- Thesis Factory Service Manual
- Year
- 2002–2009
- Section
- Fuel tank and pipes › Fuel filler pipe CAP - R.R.
Fuel filler pipe CAP - R.R.
Removing
- Open the fuel flap.
1. Undo the fuel filler cap (1a), release the retaining eyelet (1b) from its housing and remove the actual cap.
Refitting
- Position the filler cap in its housing and tighten it.
- Secure the eyelet to the pin in the housing.
- Close the fuel flap.
Removing
- Open the fuel filler cap access flap.
- Undo the cap and release the retainer securing it to the bodyshell.
Refitting
- Fit the fuel filler pipe cap and tighten it until the closing device clicks.
- Connect the cap retainer to the bodyshell.
- Close the access flap.
Removing
- Open the fuel filler cap access flap.
- Undo the cap and release the retainer securing it to the bodyshell.
Refitting
- Fit the fuel filler pipe cap and tighten it until the closing device clicks.
- Connect the cap retainer to the bodyshell.
- Close the access flap.
Removing
- Open the fuel flap.
1. Undo the fuel filler cap (1a), release the retaining eyelet (1b) from its housing and remove the actual cap.
Refitting
- Position the filler plug in its housing and tighten it.
- Secure the eyelet to the pin in the housing.
- Close the fuel flap.
Parts & tools for this job For 2002 Lancia Thesis
- PARTEngine gasket setSearch: Lancia Thesis 2002 engine gasket set
- TOOLTorque wrenchSearch: 3/8 inch torque wrench
- TOOLFeeler gauge setSearch: feeler gauge set
Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.