Crankshaft and flywheel – crankshaft
- Make
- Lancia
- Model
- Thesis Factory Service Manual
- Year
- 2002–2009
- Section
- Engine › Crankshaft and flywheel – crankshaft
‹ Prev Cylinder head(s) – cylinder head/s - various operationsNext › Crankshaft and flywheel – engine flywheel
Tightening torquesCrankshaft and flywheel – crankshaft
CRANKSHAFT AND FLYWHEEL – CRANKSHAFT
| Value - daNm | Fastening | Component | Ø | Validity |
|---|---|---|---|---|
| 2.3 - 3.3 | Bolt | PHONIC WHEEL ON CRANKSHAFT | M5 | 2.4 JTD 10V |
| (engine crankcase side) 2.0 + 100° | Bolt | MAIN BEARING CAPS | M12 | 2.4 JTD 10V |
| 2.0 + 60° | Bolt | CONNECTING ROD CAPS | M9 | 2.4 JTD 10V |
| (engine crankcase side) 0.9 - 1.2 | Bolt | CRANKSHAFT REAR COVER | M6 | 2.4 JTD 10V |
| 14.7 - 21.2 | Bolt | FLYWHEEL (MECH.) | M12 | 2.4 JTD 10V |
| Value - daNm | Fastening | Component | Ø | Validity |
|---|---|---|---|---|
| 2.8 | Bolt | CLUTCH ASSEMBLY | M8 | 2.4 JTD 20V |
| 14.7 - 21.2 | Bolt | FLYWHEEL (MECH.) | M12 | 2.4 JTD 20V |
| (engine crankcase side) 0.9 - 1.2 | Bolt | CRANKSHAFT REAR COVER | M6 | 2.4 JTD 20V |
| 2.0 + 60° | Bolt | CONNECTING ROD CAPS | M9 | 2.4 JTD 20V |
| (engine crankcase side) 2.0 + 100° | Bolt | MAIN BEARING CAPS | M12 | 2.4 JTD 20V |
| 2.3 - 3.3 | Bolt | PHONIC WHEEL ON CRANKSHAFT | M5 | 2.4 JTD 20V |
‹ Prev Cylinder head(s) – cylinder head/s - various operationsNext › Crankshaft and flywheel – engine flywheel
Parts & tools for this job For 2002 Lancia Thesis
- PARTEngine gasket setSearch: Lancia Thesis 2002 engine gasket set
- TOOLTorque wrenchSearch: 3/8 inch torque wrench
- TOOLFeeler gauge setSearch: feeler gauge set
Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.