Engine lubrication – engine oil lubrication circuit
- Make
- Lancia
- Model
- Thesis Factory Service Manual
- Year
- 2002–2009
- Section
- Engine › Engine lubrication – engine oil lubrication circuit
‹ Prev Engine lubrication – indicators/check devicesNext › Engine lubrication – engine oil cooling circuit
Tightening torquesEngine lubrication – engine oil lubrication circuit
ENGINE LUBRICATION – ENGINE OIL LUBRICATION CIRCUIT
| Value - daNm | Fastening | Component | Ø | Validity |
|---|---|---|---|---|
| (Main bearing caps side) 5 | Bolt | ENGINE OIL PUMP | M10x1.25 | T.T |
| (Engine oil pump side) 4.3 - 5.3 | Bolt | ENGINE OIL PUMP DRIVE CHAIN | M10 | T.T |
| 0.9 | Bolt | OIL SECTION PUMP | M6 | 2.4 20 V,2.0 TB |
| (Main bearing caps side) 5 | Bolt | ENGINE OIL PUMP | M10x1.25 | T.T |
| (Engine oil pump side) 4.3 - 5.3 | Bolt | ENGINE OIL PUMP DRIVE CHAIN | M10 | T.T |
| (Engine crankcase side) 20.0 -24.7 | Nut | CRANKSHAFT PULLEY | M28 | T.T |
| (Engine oil pump side) 4.3 - 5.3 | Bolt | ENGINE OIL PUMP DRIVE CHAIN | M10 | T.T |
| (Engine crankcase side) 0.7 - 0.9 | Bolt | FRONT COVER CRANKSHAFT | M6 | T.T |
| (Engine crankcase side) 0.7 - 0.9 | Bolt | FRONT COVER CRANKSHAFT | M6 | T.T |
| (Engine crankcase side) 20.0 -24.7 | Nut | CRANKSHAFT PULLEY | M28 | T.T |
| (Engine oil pump side) 4.3 - 5.3 | Bolt | ENGINE OIL PUMP DRIVE CHAIN | M10 | T.T |
| 1.6 - 2.0 | Nut | ENGINE OIL PUMP PRESSURE RELIEF VALVE | 2.4 20 V,2.0 TB | |
| 0.8 - 1,2 | Bolt | OIL PUMP GEARS COVER | 2.4 20 V,2.0 TB | |
| 4.5 - 5.5 | Bolt (left hand thread) | OIL PUMP DRIVE CHAIN ASSEMBLY | M10 | 2.4 20 V,2.0 TB |
| 1.6 - 2.0 | Plug | ENGINE OIL PUMP PRESSURE RELIEF VALVE | 2.0 TB | |
| 0.8 - 1,2 | Bolt | OIL PUMP GEARS COVER | 2.0 TB | |
| 0.6 - 0.7 | Left hand bolt | OIL PUMP DRIVE CHAIN ASSEMBLY | M10 | 2.0 TB |
| 0,9 - 1,1 | Bolts | OIL PUMP CASE | T.T | |
| 3,4 - 3,6 | PRESSURE RELIEF VALVE ENGINE OIL PUMP | T.T | ||
| (Engine oil pump casing side) | Bolt | ENGINE OIL PUMP COVER | M | 3.2 V6 |
| (Main bearing caps side) 5 | Bolt | ENGINE OIL PUMP | M10x1.25 | T.T |
| (Engine oil pump side) 4.3 - 5.3 | Bolt | ENGINE OIL PUMP DRIVE CHAIN | M10 | T.T |
| Value - daNm | Fastening | Component | Ø | Validity |
|---|---|---|---|---|
| 0.9 | Bolt | OIL SECTION PUMP | M6 | 2.4 JTD 10V |
| 0.6 | Bolts | FRONT WING CROSSMEMBER HEADLAMP HOUSINGS | M6 | 2.4 JTD 10V |
| 1.5 | Bolt | CAMSHAFT CAPS | M7 | 2.4 JTD 10V |
| 1.6 - 2.0 | Nut | ENGINE OIL PUMP PRESSURE RELIEF VALVE | 2.4 JTD 10V | |
| 0.8 ÷ 1.2 | Bolts | ENGINE OIL PUMP | 2.4 JTD 10V | |
| 4.5 ÷ 5.5 | Left hand bolt | OIL PUMP GEARS | 2.4 JTD 10V |
| Value - daNm | Fastening | Component | Ø | Validity |
|---|---|---|---|---|
| 1.6 ÷ 2.0 | Nut | PRESSURE RELIEF VALVE ENGINE OIL PUMP | 2.4 JTD 20V | |
| 0.8 ÷ 1.2 | Bolts | OIL/COOLANT PUMP DRIVESHAFT SEAL | 2.4 JTD 20V | |
| 4.5 ÷ 5.5 | Left hand bolt | OIL PUMP GEARS | M10 | 2.4 JTD 20V |
| 0.6 | Bolts | FRONT WING CROSSMEMBER HEADLAMP HOUSINGS | M6 | T.T |
| 0.6 | Bolts | FRONT WING CROSSMEMBER HEADLAMP HOUSINGS | M6 | T.T |
| (Preconverter) 2.8 | Bolts | EXHAUST PIPE TO ENGINE | T.T |
‹ Prev Engine lubrication – indicators/check devicesNext › Engine lubrication – engine oil cooling circuit
Parts & tools for this job For 2002 Lancia Thesis
- PARTEngine gasket setSearch: Lancia Thesis 2002 engine gasket set
- TOOLTorque wrenchSearch: 3/8 inch torque wrench
- TOOLFeeler gauge setSearch: feeler gauge set
Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.