Tiiming system – camshaft (1) in cylinder head (1)
- Make
- Lancia
- Model
- Thesis Factory Service Manual
- Year
- 2002–2009
- Section
- Engine › Tiiming system – camshaft (1) in cylinder head (1)
‹ Prev Crankshaft and flywheel – engine flywheelNext › Fuel circuit pump/s and devices – fuel filters
Tightening torquesTiiming system – camshaft (1) in cylinder head (1)
TIIMING SYSTEM – CAMSHAFT (1) IN CYLINDER HEAD (1)
| Value - daNm | Fastening | Component | Ø | Validity |
|---|---|---|---|---|
| 1.5 | Bolt | CAMSHAFT CAPS | M7 | 2.4 JTD 10V |
| 1.5 | Bolt | CAMSHAFT CAPS | M7 | 2.4 JTD 10V |
| (cylinder head side) 1.4 - 2.0 | Bolt | CAMSHAFT CAPS | M7 | 2.4 JTD 10V |
| 11.0 ÷ 15.9 | Bolt | TOOTHED DRIVEN PULLEY | M12 | 2.4 JTD 10V |
| (Cylinder head side) 2.3 - 3.3 | Bolt | VACUUM UNIT | M8 | 2.4 JTD 10V |
‹ Prev Crankshaft and flywheel – engine flywheelNext › Fuel circuit pump/s and devices – fuel filters
Parts & tools for this job For 2002 Lancia Thesis
- PARTEngine gasket setSearch: Lancia Thesis 2002 engine gasket set
- TOOLTorque wrenchSearch: 3/8 inch torque wrench
- TOOLFeeler gauge setSearch: feeler gauge set
Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.