Inlet and exhaust manifolds – inlet manifolds
- Make
- Lancia
- Model
- Thesis Factory Service Manual
- Year
- 2002–2009
- Section
- Engine › Inlet and exhaust manifolds – inlet manifolds
‹ Prev Diesel fuel injection system – diesel injection pressure pump electronic controlNext › Emission control system – exhaust emission control system
Tightening torquesInlet and exhaust manifolds – inlet manifolds
Inlet and exhaust manifolds – inlet manifolds
| Value - daNm | Fastening | Component | Ø | Validity |
|---|---|---|---|---|
| 2.5 | Nuts | EXHAUST MANIFOLD/S | M8 | 2.4 JTD 10V |
| 2.5 | Bolt | EGR VALVE PIPE | M8 | 2.4 JTD 10V |
| 2.5 | Bolt | EGR VALVE PIPE | M8 | 2.4 JTD 10V |
| 2.5 | Nut | INJECTOR FUEL MANIFOLD (DIESEL) | M8 | 2.4 JTD 10V |
| Value - daNm | Fastening | Component | Ø | Validity |
|---|---|---|---|---|
| 2.5 | Nut | INLET MANIFOLD | M8 | T.T |
| 2.5 | Bolt | POWER STEERING PUMP | M8 | T.T |
| (Cylinder block/crankcase) 2.5 | Bolt | INJECTION PRESSURE PUMP MOUNT | M8 | T.T |
‹ Prev Diesel fuel injection system – diesel injection pressure pump electronic controlNext › Emission control system – exhaust emission control system
Parts & tools for this job For 2002 Lancia Thesis
- PARTExhaust gasketSearch: Lancia Thesis 2002 exhaust gasket
- TOOLPenetrating oilSearch: penetrating oil
- TOOLOBD2 scannerSearch: OBD2 scanner
Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.