Emission control system – exhaust emission control system
- Make
- Lancia
- Model
- Thesis Factory Service Manual
- Year
- 2002–2009
- Section
- Engine › Emission control system – exhaust emission control system
‹ Prev Inlet and exhaust manifolds – inlet manifoldsNext › Emission control system – motor for EGR valve self-adjustment - r.r.
Tightening torquesEmission control system – exhaust emission control system
EMISSION CONTROL SYSTEM – EXHAUST EMISSION CONTROL SYSTEM
| Value - daNm | Fastening | Component | Ø | Validity |
|---|---|---|---|---|
| 4.5 | Nut | REAR SILENCER EXHAUST | M10 X 1.25 | 2.4 JTD 10V |
| (catalytic converter) 2.8 | Nuts | ENGINE OUTLET EXHAUST PIPE/MANIFOLD ] | M8 | 2.4 JTD 10V |
| Value - daNm | Fastening | Component | Ø | Validity |
|---|---|---|---|---|
| 4.5 | Nut | REAR SILENCER EXHAUST | M10 X 1.25 | T.T |
| (catalytic converter) 2.8 | Bolts | EXHAUST PIPE TO ENGINE | M8 | T.T |
| (Preconverter) 2.8 | Bolts | EXHAUST PIPE TO ENGINE | T.T |
‹ Prev Inlet and exhaust manifolds – inlet manifoldsNext › Emission control system – motor for EGR valve self-adjustment - r.r.
Parts & tools for this job For 2002 Lancia Thesis
- PARTExhaust gasketSearch: Lancia Thesis 2002 exhaust gasket
- TOOLPenetrating oilSearch: penetrating oil
- TOOLOBD2 scannerSearch: OBD2 scanner
Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.