Workshop Manuals Factory service & repair Lancia
01 General information02 Specifications03 Manufacturing data and tolerances04 Tightening torques05 Fluids and lubricants06 Maintenance07 Diagnostic checks08 Engine09 Clutch10 Gearbox and differential11 Axles and driveshafts12 Brakes13 Steering14 Suspension and wheels15 Heating, air conditioning and auxiliary units16 Electrical equipment17 Body fittings18 Body panels and frame19 Wiring diagrams and electrical functions20 Wiring harnesses21 Connectors and pin-outs22 Fault diagnosis23 Special tools
Lancia Ypsilon Factory Service Manual (2003-2011)22 · Fault diagnosis
22 · Diagnostics

Clock not working

Make
Lancia
Model
Ypsilon Factory Service Manual
Year
2003–2011
Section
Instrument panel › Clock not working
Fault diagnosisClock not working

CLOCK NOT WORKING

With the ignition ON, the display does not display the time correctly or at all.

Results of the tests
1INSTRUMENT PANEL FUNCTIONS CHECKAll OKProblems metOperation

check

  • that the display shows the correct time;
  • that it is possible to adjust the time;
  • that the clock moves forward;
Continue to Step 2The display/time cannot be seen properlyContinue to Step 2
The time cannot be adjustedContinue to Step 4
The clock is stuckReplace instrument panel Op. 5560B11
The display/time cannot be seen properlyContinue to Step 2
2CHECKING WITH DIAGNOSTIC EQUIPMENTAll OKProblems metOperation

Connect the Examiner to the diagnostic socket

Check that there are no faults in the instrument panel

Continue to Step 3There are errorsContinue according to the instructions for the diagnostic equipment
3CHECK WITH DIAGNOSTIC EQUIPMENTAll OKProblems metOperation
Keeping the Examiner connected to the diagnostic socket, check the operation of the display in active diagnosis.End of diagnosisDefective displayReplace instrument panel Op. 5560B11
4ELECTRICAL CIRCUIT CHECKAll OKProblems metOperation

Check:

  • Connections between control panel and instrument panel
  • Connections between control panel and earth;
  • Control panel power supply;
  • Control panel earth See E4010 INSTRUMENT PANEL
Continue to Step 5Connections defective, earth or supply defectiveRestore the correct connections, if necessary, replace the wiring: See E4010 INSTRUMENT PANEL
5LEFT CONTROL PANEL CHECKAll OKProblems metOperation
Check that the left control panel is working properly: See E4010 INSTRUMENT PANELContinue to Step 6Control panel defectiveReplace the control panel Op. 7040A56
6CHECK ON CORRECT OPERATIONAll OKProblems metOperation
Check that the fault is no longer presentEnd of diagnosis

Parts & tools for this job For 2003 Lancia Ypsilon

Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.