Passenger air bag disabled warning light
- Make
- Lancia
- Model
- Ypsilon Factory Service Manual
- Year
- 2003–2011
- Section
- Instrument panel › Passenger air bag disabled warning light
Fault diagnosisPassenger air bag disabled warning light
PASSENGER AIR BAG DISABLED WARNING LIGHT
The fault warning light is on and the passenger air bag is not excluded from the control selector
The passenger airbag disablement warning light is controlled directly via a dedicated link to the Instrument Panel Node from the airbag control unit
| Results of the tests | ||||
| 1 | CHECK WITH DIAGNOSTIC EQUIPMENT | All OK | Problems met | Operation |
|---|---|---|---|---|
Connect the tester, check the airbag control unit for:
| Continue to Step 4 | System/component fault | Continue according to the instructions for the diagnostic equipment | |
| Command not plausible | Continue to Step 2 | |||
| 2 | ELECTRICAL EQUIPMENT CHECK | All OK | Problems met | Operation |
| Check the continuity and the insulation of the wires between the selector control on the passenger side facia and the airbag control unit. See E7030 AIRBAG | Continue to Step 3 | Wiring short circuited or circuit open | Replace wiring See E7030 AIRBAG | |
| 3 | CHECKING CONTROL SELECTOR | All OK | Problems met | Operation |
| Check the correct operation of the selector on the passenger side facia | Continue to Step 4 | Selector not working | Change passenger air bag disablement selector Op. 5580C26 | |
| 4 | CHECK ON CORRECT OPERATION | All OK | Problems met | Operation |
| Check that the fault is no longer present | End of diagnosis | Fault persists | Change airbag control unit Op. 5580C14 | |
Parts & tools for this job For 2003 Lancia Ypsilon
- TOOLOBD2 scanner with SRSSearch: OBD2 scanner ABS SRS
- TOOLTrim removal tool kitSearch: trim removal tool kit
Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.