Electric power assisted steering fault display
- Make
- Lancia
- Model
- Ypsilon Factory Service Manual
- Year
- 2003–2011
- Section
- Instrument panel › Electric power assisted steering fault display
‹ Prev Display does not signal ice danger with low outside temperatureNext › Engine oil pressure fault display
Fault diagnosisElectric power assisted steering fault display
ELECTRIC POWER ASSISTED STEERING FAULT DISPLAY
The Electric Steering Node communicates fault messages to the Instrument Panel Node on the C-CAN network and - via a gateway - on the B-CAN network.
| Results of the tests | ||||
| 1 | CHECKING WITH DIAGNOSTIC EQUIPMENT | All OK | Problems met | Operation |
|---|---|---|---|---|
| Connect the tester and check the Electric Steering Node for faults | Continue to Step 2 | Faults in system | Continue as instructed by the tester | |
| 2 | CHECK ON CORRECT OPERATION | All OK | Problems met | Operation |
| Check that the fault is no longer present | End of diagnosis | Fault persists | Replace the instrument panel | |
‹ Prev Display does not signal ice danger with low outside temperatureNext › Engine oil pressure fault display
Parts & tools for this job For 2003 Lancia Ypsilon
- TOOLTie rod end toolSearch: tie rod end puller
- TOOLBall joint separatorSearch: ball joint separator
- FLUIDPower steering fluidSearch: Lancia power steering fluid
Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.