Torque values
- Make
- Land Rover
- Model
- Defender 90 Workshop Manual (NAS)
- Section
- Specifications, torque › Torque values
Automatic gearboxTorque values
TORQUE VALUES
Nm
| Coupling shaft to mainshaft | 42* |
| Filler tube to sump | 68 |
| Gear change lever to gearbox | 25 |
| Cooler pipe adaptor to gearbox | 42 |
| Securing screws - clutch F | 10 |
| Securing screw - parking pawl | 10 |
| Securing screws - pump | 10 |
| Intermediate plate plugs (M20) | 50 |
| Intermediate plate plugs (M14) | 40 |
| Bell housing mounting bolts | 46 |
| Governor mounting screws | 10 |
| Extension housing bolts | 23 |
| Control unit mounting bolts | 8 |
| Draib plug - fluid pan | 10 |
| Mounting screws for sump | 8 |
| Drive plate to converter | 39* |
| Gearbox to engine | 42 |
| Strut (threaded end) | 42 |
| Bottom cover to converter housing | 9 |
| Cover - converter housing | 9 |
| Drive plates to crankshaft adaptor | 40* |
| Adaptor to crankshaft | 84 |
lbf ft
30* 50 18 30 7 7 7 35 30 34 7 17 6 7 6 29* 31 31 7 7 30* 62
NOTE: * These bolts MUST have threads coated with Loctite 270 prior to assembly.
Torque values below are for all screws and bolts used except for those that are specified otherwise.
METRIC Nm
| M5 | 6 |
| M6 | 9 |
| M8 | 25 |
| M10 | 45 |
| M12 | 90 |
| M14 | 105 |
| M16 | 180 |
UNC / UNF Nm
| 1/4 | 9 |
| 5/16 | 24 |
| 3/8 | 39 |
| 7/16 | 78 |
| 1/2 | 90 |
| 5/8 | 136 |
lbf ft
5 7 18 33 65 75 130
lbf ft
7 18 28 58 65 100
Parts & tools for this job For Land Rover Defender
Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.