Workshop Manuals Factory service & repair Land Rover
01 Introduction02 General specification data03 Engine tuning data04 General fitting reminders05 Lubricants, fluids and capacities06 Maintenance07 Engine08 Emission control09 Fuel system10 Cooling system11 Manifold and exhaust system12 Transfer gearbox13 Automatic gearbox14 Propeller shafts15 Rear axle and final drive16 Front axle and final drive17 Steering18 Front suspension19 Rear suspension20 Brakes21 Wheels and tyres22 Chassis and body23 Heating and ventilation24 Air conditioning25 Wipers and washers26 Electrical27 Instruments
Land Rover Defender 90 Workshop Manual (NAS)05 · Lubricants, fluids and capacities
05 · General

Capacities

Make
Land Rover
Model
Defender 90 Workshop Manual (NAS)
Section
Information › Capacities
Lubricants, fluids and capacitiesCapacities

CAPACITIES

The following capacity figures are approximate and are provided as a guide only.

Capacities (approx.) Litres

Fuel tank usable fuel59
Engine sump oil - V8i6.0
  -Extra after fitting new filter0,6
Automatic gearbox *9,1
Transfer gearbox oil2,3
Front differential1,7
Rear differential2.3
Power steering box and reservoir2,9
Swivel pin housing oil / grease (each) **0,35
Cooling system12.8
Washer bottle3,0

US unit 15.6 gall 6.5 quarts 1.2 pt 9.6 quarts 4.8 pt 3.6 pt 4.8 pt 6.0 pt 0.75 pt 13.5 quarts 6.0 pt

NOTE: All levels must be checked by dipstick or level plugs as applicable.

* When draining fluid from the ZF automatic gearbox, fluid will remain in the torque converter, refill to high level on dipstick only.

** Swivel pin housings with a filler plug only must be filled with GREASE.

Parts & tools for this job For Land Rover Defender

Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.