300Tdi Defender Clutch Slave Cylinder Overhaul Instructions
CLUTCH
3
OVERHAUL
Assemble
10. Fit bleed valve to cylinder body, do not
overtighten.
11. Lubricate seals, piston and bore with new
hydraulic fluid.
12. Fit seal into piston groove with lip of seal
towards fluid inlet end of cylinder.
13. Locate spring over front end of piston.
14. Fit assembly, spring first, into cylinder ensuring
seal lip does not fold back.
15. Fill dust cover with suitable rubber grease and fit
cover to cylinder.
16. Fit slave cylinder
See Repair, Slave cylinder .