TD5 Defender - Coolant Pump | Cooling System
26
COOLING SYSTEM
2
REPAIR
PUMP - COOLANT
Service repair no - 26.50.01
Remove
1. Drain cooling system. See Adjustment.
2. Remove centrifuge. See ENGINE , Repair.
3. Release clip and hose from coolant pump cover.
4. Remove 5 bolts securing coolant pump cover.
5. Remove cover and coolant pump from housing
and discard ’O’ rings.
Refit
6. Clean coolant pump housing and mating faces.
7. Fit new ’O’ rings to coolant pump and cover.
8. Fit coolant pump and cover and tighten bolts to 9
Nm (7 lbf.ft).
9. Connect hose to pump cover and secure clip.
10. Refit centrifuge. See ENGINE , Repair.
11. Refill cooling system. See Adjustment.