TD5 Defender
47
PROPELLER SHAFTS
2
REPAIR
Refit
7. Grease propeller shaft universal joints.
8. Grease propeller shaft spline.
9. Clean propeller shaft flange mating faces.
10. Fit propeller shaft to park brake flange bolts.
NOTE: Ensure relationship marks align.
11. Position propeller shaft to rear axle flange and fit
bolts.
12. Fit nuts and bolts securing propeller shaft to rear
axle flange and tighten to 48 Nm (35 lbf.ft).
NOTE: Rotation of propeller shaft may be
required during the above procedure.
13. Fit nuts securing propeller shaft to park brake
and tighten to 48 Nm (35 lbf.ft).
NOTE: Rotation of propeller shaft may be
required during the above procedure.
14. Remove stand(s) and lower vehicle.