Discovery II
ALARM SYSTEM AND HORN
REPAIR 86-4-25
REPAIR
Switch - central door locking
$% 86.26.30
Remove
1. Carefully remove clock assembly from louvre
panel.
2. Disconnect multiplug from door lock switch.
3. Remove door lock switch from clock.
Refit
1. Fit door lock switch to clock assembly.
2. Connect multiplug to door lock switch.
3. Position clock assembly and push to secure in
position.
Switches - horn
$% 86.30.01
Remove
WARNING: It is imperative that before any
work is undertaken on the SRS system the
appropriate information is read thoroughly.
1. Disconnect both battery leads, negative lead
first, and wait 10 minutes.
2. Remove driver's airbag module.
3. Release horn switch multiplugs and leads from
steering wheel base.
4. Disconnect horn switch multiplugs from
harness.
5. Disconnect horn switch multiplug from rotary
coupler harness.
6. Remove screw securing earth leads to steering
wheel.
7. Using a broad round edged tool, carefully prise
horn switches from steering wheel.
Refit
1. Fit to steering wheel and connect multiplugs.
2. Fit earth leads and secure with screw.
3. Secure leads and multiplugs to base of steering
wheel.
4. Fit driver's airbag module.