Discovery II
FRONT AXLE
REPAIRS
54-7
13. Fit front brake discs.
14. Fit front road wheels and tighten nuts to 140
Nm (103 lbf.ft).
15. Remove stand(s) and lower vehicle.
16. Fill differential with oil.
Seal - differential pinion
$% 54.10.20
Remove
1. Raise front of vehicle.
WARNING: Do not work on or under a
vehicle supported only by a jack. Always
support the vehicle on safety stands.
2. Reference mark front propeller shaft for
reassembly.
3. Remove 4 nuts and bolts securing propeller
shaft to differential. Release propeller shaft and
tie aside.
4. Using LRT-51-003 to restrain pinion flange,
remove bolt and washer securing pinion flange.
Remove pinion flange.
5. Position container to catch oil spillage.