Discovery II
MAINTENANCE
10-14
PROCEDURES
Intercooler - diesel engine
Remove
1. Remove intercooler.
Flush
1. Flush intercooler element using Flushing
Solvent Part No. STC 9713, following the
manufacturer's instructions.
2. Thoroughly dry intercooler ensuring that no
trace of solvent remains in the element.
3. Refit intercooler on completion.
Engine oil - V8 engine
WARNING: Avoid excessive skin contact with
used engine oil. Used engine oil contains
potentially harmful contaminants which may
cause skin cancer or other serious skin
disorders.
Replace
1. Position suitable container beneath sump.
2. Clean area around oil drain plug.
3. Remove oil drain plug, discard sealing washer.
4. Allow oil to drain.
5. Fit new sealing washer to oil drain plug.
6. Fit engine drain plug and tighten to 33 Nm (24
lbf.ft).
7. Fill engine with recommended grade of oil to