Discovery II
MANUAL GEARBOX - R380
ADJUSTMENTS
37-9
ADJUSTMENTS
Spring - gear lever bias
$% 37.16.26
Adjust
1. Remove centre console.
REPAIRS, Console - centre - manual
models.
2. Loosen pinch bolt and remove gear lever
extension.
3. Drill out 9 pop rivets and remove gear lever
cover plate and seal.
4. Remove retaining strap and remove gear lever
housing rubber boot.
5. Loosen bias adjustment plate bolts.
6. Select 4th gear and move lever fully to the right
and tighten bias plate adjustment bolts to 25
Nm (18 lbf.ft).
7. Check adjustment is correct by selecting 3rd
and 4th gears.
8. Fit gear lever housing rubber and secure with
retaining strap.
9. Fit seal and cover plate and secure with pop
rivets.
10. Fit gear lever extension and tighten pinch bolt
to 25 Nm (18 lbf.ft).
11. Fit centre console.