Discovery II
REAR AXLE
REPAIRS
51-5
REPAIRS
Differential - assembly
$% 51.15.01
Remove
1. Raise rear of vehicle.
WARNING: Do not work on or under a
vehicle supported only by a jack. Always
support the vehicle on safety stands.
2. Drain oil from differential.
3. If same components are to be refitted,
reference mark propeller shaft and mating
components.
4. Remove 3 nuts and bolts securing flexible
coupling to pinion flange. Release propeller
shaft and tie aside.
5. Using tool LRT-51-008, extract the centralising
peg from the pinion flange. Remove the
centralising peg from the tool.
6. Remove LH and RH rear brake discs.
7. Disconnect each ABS sensor multiplug.
8. Release each harness from brake hose and
hose bracket.
9. Remove 4 bolts securing each rear wheel hub
to rear axle.
M51 0041B
5
4
M51 0056
LRT-51-008