Discovery II
REAR SUSPENSION
ADJUSTMENTS
64-25
ADJUSTMENTS
SLS calibration blocks
$% 64.50.38
Fit
1. Connect TestBook to vehicle.
2. Ensure contact faces of calibration blocks LRT-
64-003/1 and LRT-64-003/2 are clean.
3. Using Testbook, operate the SLS system to
raise the body, position the calibration blocks
LRT-64-003/1 and LRT-64-003/2 between the
rear axle and the body, then lower the body
onto the calibration blocks. The calibration
blocks are handed and only fit one way.
Remove
1. Using Testbook, operate the SLS system to
raise the body, remove the calibration blocks
LRT-64-003/1 and LRT-64-003/2 from
between the rear axle and the body.
2. Disconnect TestBook from the vehicle.