landrover Workshop Repair Guides

Land Rover Workshop Service and Repair Manuals

Wheel hub|Page 983 > < SLS calibration blocks|Page 980
Page 836
background image

REAR SUSPENSION

REPAIRS

64-27

REPAIRS

Wheel hub

$% 64.15.01  

Models with SLS:

WARNING: Ensure the air suspension system is 
made safe before commencing work. Otherwise 
the chassis may lower onto the bump stops 
during repair.

Remove

1. Raise rear of vehicle. 

WARNING: Do not work on or under a 
vehicle supported only by a jack. Always 
support the vehicle on safety stands.

2. Remove road wheel.

3. Release stake in drive shaft nut. 
4. With an assistant depressing the brake pedal, 

remove and discard  drive shaft nut. 

5. Remove rear brake disc.  

 

 + 

 BRAKES, REPAIRS, Brake disc - 

rear.

6. Disconnect ABS sensor multiplug.
7. Release harness from brake hose and hose 

bracket.

8. Remove 4 bolts securing wheel hub to axle. 

9. Release and remove wheel hub and drive shaft 

assembly from axle. Remove and discard 'O' 
ring from wheel hub.

Wheel hub|Page 983 > < SLS calibration blocks|Page 980