ElectricalLights on alarm
LIGHTS ON ALARM
If the side lights or headlights are on, ignition off and the driver’s door is opened, the CCU will sound a continuous warning buzzer to warn the driver that the side lights or headlights are turned on. The CCU senses signals from the headlight switch, ignition off and driver’s door open.
The CCU lights on alarm inputs and outputs are shown in the following table:
| INPUTS Ignition sense off Lighting switch side lights or headlights sense Driver’s door sense |
CATALYST OVERHEAT WARNING (MARKET SELECTABLE)
A warning light to warn the driver of catalyst overheat is located in the instrument panel. The warning light is only fitted on certain variants. After the ignition is switched on, the catalyst warning lamp will illuminate for a period of approximately 5 seconds to show that the warning lamp is operative. After 5 seconds, the warning lamp will go off and should only illuminate if the CCU senses catalyst overheat and ignition 1 on signals.
The CCU catalyst overheat warning light inputs and outputs are shown in the following table:
| INPUTS Ignition sense (position II) Catalyst overheat sense |
| OUTPUTS Catalyst overheat warning lamp |
28 Electrical
