Rear Screen Wiper Motor Fuse Blow (Electrical)
- Make
- Land Rover
- Model
- Freelander Workshop Manual
- Year
- 1998–2000
- Section
- Description and operation › Rear Screen Wiper Motor Fuse Blow
Rear Screen Wiper Motor Fuse Blow
If the rear screen wiper fuse blows, for whatever reason, when the rear wiper is operating, a requested timer of approximately 3.2 seconds is initiated by the CCU. If an off-screen park signal is not sensed within the timed period, the CCU removes power from the rear wiper relays. Tail door window functions will be inhibited with the exceptions that the tail door can be opened and closed, removal of the roof will cause the tail door window to lower and window calibration will be allowed.
When the fault has been corrected, selection of a rear screen wiper function is required to recalibrate the rear wiper and the rear screen operation.
The CCU rear screen wiper inputs and outputs are shown in the following table:
| INPUTS Ignition sense (position II) Rear wiper request Rear wiper wash sense Reverse gear sense Rear wiper park sense Rear wiper out wipe sense Tail door window position Roof off sense (3 door only) Front wiper park power Front wiper intermittent request |
| CCU |
| OUTPUTS Rear wiper forward relay Rear wiper reverse relay |
Parts & tools for this job For 1998 Land Rover Freelander
- PARTWiper bladesSearch: Land Rover Freelander 1998 wiper blades
- PARTWasher pumpSearch: Land Rover Freelander 1998 washer pump
Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.